Collection: Tekno RC News

EB48 2.0 Build (Bag M-P) Follow along as we give some insight on how to build the new EB48 2.0 kit with both photos and videos from Tyler Hooks. This article focuses on Bags M-P. Alright everyone, the EB48 2.0 kits are starting to ship so here is a little guide to building your own. https://youtu.be/YBLe_NvOI50 Bag M Bag M is the rear shocks with the only difference being the longer lower shock bushing for reduced up travel, the Orange spring, and 600 weight fluid. Screw the cap all the way on. Push the piston all the way to the

New NB48 2.0 Aluminum Throttle Servo Horn Now Available! Tekno RC is pleased to announce the release of a new aluminum throttle servo horn for the successful NB48 2.0. Please read below for detailed information. Eliminate the possibility of your servo horn stripping, coming off, or your brake and throttle going out of adjustment and causing a runaway. Not only is this laser-etched servo horn made from aluminum and inherently much less likely to strip or flex, but it also clamps and grips the servo output shaft tightly to help prevent it from falling off or losing adjustment. In addition,

EB48 2.0 Build (Bag G-I) Follow along as we give some insight on how to build the new EB48 2.0 kit with both photos and videos from Tyler Hooks. This article focuses on Bags G-I. Alright everyone, the EB48 2.0 kits are starting to ship so here is a little guide to building your own. https://youtu.be/AHMlHbI3gRw Bag G: Bag G is the installation of the front arms and sway bar assembly. The arms have caster built in to make for a stronger caster block with less breakage. Again a little bit of deviation from the manual on this step as