The Gatekeeper Front Pass Through Faux Winch with Light Bucket Front Filler Panels (SBC083GKL) is a great way to add a realistic look to your build. The pass through winch fills in the area behind the front bumper and still allows the use of an internal servo winch. The front filler panels include pre-installed 5mm 12V LED lights to make it easy to add another dimension of scale detail. The panel fills the void in the front of the cage at the front bumper to help hide the servo and give the Gatekeeper an improved scale look, while at the same time helping to light up the trail after the sun goes down. The panel features pivoting cage clamps on the back side, holding the panel to the cage securely and making them easy to install. If desired, these can be further detailed using Tamiya TS primer and paint. The wires are left open ended, allowing you to install the connector you prefer.
Printed at .2mm layer thickness with 20% infill, scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.