Skip to content
By Axial

1/18 Yeti Jr. Can-Am Maverick 4WD Brushed RTR

SKU: AXI90069
Regular price $174.99
Regular price Sale price $174.99
Shipping calculated at checkout.
Regular price $174.99
Regular price Sale price $174.99

Overview

Features

  • Licensed Can-Am Maverick body and wheels
  • Licensed Maxxis Bighorn 2.0 tires
  • Spektrum STX2 2.4GHz transmitter
  • Spektrum waterproof ESC/Receiver Combo
  • Dynamite 37T brushed electric motor
  • High-torque metal gear servo for rough offroad conditions
  • AR18 solid rear axle with ample ground clearance
  • Adjustable coilover shocks
  • Three-linked rear suspension for improved handling
  • Independent front suspension for high speed stability
  • Rear hinge body mount system
  • 48P gears give you more possible configurations
  • Adujstable motor mount and easy access chassis
  • Full vehicle ball bearings
  • Adjustable battery tray
  • Centered rear driveshaft for efficiency
  • Easy to Use USB Charger Included

Overview

The Yeti Jr™ RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale - then tops it off with a licensed Can-Am® Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures!

Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis® Bighorn 2.0 radial tires, youve got all the traction you need for fast, smooth rides over virtually any surface.

Video Overview

 

 

Spektrum STX2 Transmitter

The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting.

  • Built-in 3-position throttle limiter
  • Steering & throttle rate & trim adjustments with throttle and steering reversing
  • FHSS 2.4GHz protocol offers extended range and interference free performance
  • AA batteries included
Spektrum STX2 Transmitter

Spektrum ESC/Receiver Combo

The Spektrum ESC/Receiver is an all in one unit featuring an EC3 battery connector, a convenient on- off switch and its water resistant for peace of mind when water splashes on your electronics.

WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.
Spektrum ESC/Receiver Combo

37T Brushed Electric Motor

Delivering an even balance of speed and technical adventuring, the Dynamite Tazer 380 37T motor features a worry-free design with enlarged cooling ports for extended periods of use. The motor is paired with a 15T pinion and 60T spur gear for extra speed!

  • 37T, 380 size motor
  • Waterproof
37T Brushed Electric Motor

Metal Gear Servo

Steering is powered by a Spektrum high torque micro servo, featuring a metal gear train to help withstand rough offroad conditions.

  • 4.8V Torque: 34.9 oz-in (2.5 kg-cm)
  • 6.0V Torque: 41.8 oz-in (3.0 kg-cm)
  • 4.8V Speed: 0.09 sec/60°
  • 6.0V Speed: 0.08 sec/60°
Metal Gear Servo

Dynamite 1300mAh NiMH Battery

The included Dynamite 1300mAh NiMH battery pack features a convenient EC3 connector and a 1300mAh charge capacity.

  • Type: NiMH
  • Connector Type: EC3
  • Capacity: 1300mAh
  • Cell Size: 2/3A
  • Voltage: 7.2V
  • Configuration: Flat
Dynamite 1300mAh NiMH Battery

Dynamite USB Charger

The Dynamite 6-Cell NiMH USB battery charger is small, compact, and easy to operate. Simply plug into a USB power source and plug the NiMH battery into the charger and youre charging.

NOTE: For use with 6-cell NiMH batteries only.
Dynamite USB Charger

AR18 Solid Rear Axle

To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the AR18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling.

Rear suspension features:

  • 8mm axle with 12mm hex adapter
  • Open diff
  • 61mm-90mm 7mm diameter shocks with 3mm shocks shafts
  • Multiple shock mounting positions
AR18 Solid Rear Axle
AR18 Solid Rear Axle

 

Adjustable Coilover Shocks

The threaded shock bodies hold a singl