From Traxxas:
Tools Used:
- 1.5mm, 2mm, & 2.5mm hex tools
- 5.5mm & 7mm nut drivers
- Needle nose pliers
- Hobby knife
- Electric drill
- 2mm, 2.5mm, & 1/8in drill bits
- Body reamer
- RC body paint
- RC tire glue
- All-purpose cleaner
- 4mm wrench
- Small flathead screwdriver
- Side cutters
- RC body scissors (curved & straight)
- U-joint wrench
- Sheet of paper (for painting)
- Permanent marker (to mark position for OBA speakers)
- Table vise
- Dremel tool with cutting disk and sanding drum
- Microfiber cloth
- Safety glasses
Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.
Learn More: https://traxxas.com/news/custom-drag-slash
Visit Traxxas.com
See more posts about Traxxas
Never miss an issue of RC Car Action!
Subscribe today with a Digital Edition subscription or Print + Digital combo!
The post Project Drag Slash Custom Build [VIDEO] appeared first on RC Car Action.